HP Cluster Platform Express v2010 Workgroup System and Cluster Platform Expres - Page 113

The following table summarizes the use of the interconnect module bays for c7000 enclosures in HP Cluster Platform Express BladeSystem configurations with double-density server blades. Bay Interconnect Module Bay 1 Interconnect Module Bay 2 Use HP GbE2c Module HP GbE2c Module Bay Interconnect Module Bay 3 Interconnect Module Bay 4 Use Optional HP GbE2c Module (for external network) Not used Bay Interconnect Module Bay 5 Interconnect Module Bay 6 Use InfiniBand Switch Module (double-width) Bay Interconnect Module Bay 7 Interconnect Module Bay 8 Use InfiniBand Switch Module (double-width) E.5 CPE with c7000 Fan Bay Rules Fan bays and devices bays are populated according the CPE with c7000 enclosure configuration rules. The following table shows both fan and device population rules. Device bays are to be populated in the sequence shown. Note: In the following table, the term "device" refers to either a server blade or a storage blade. Number of Devices 1-2 3-7 8-16 Device Bays 1 and 2 1, 2, 3, 4, 9, 10, 11, 12 1-16 Number of Fans 4 6 8 Fan Bays 4, 5, 9, 10 3, 4, 5, 8, 9, 10 1, 2, 4, 5, 6, 7, 9, 10 E.6 CPE with c7000 Power Distribution Rules CPE BladeSystem with c7000 enclosure configurations support redundant power supplies (N+1) in the c7000 enclosure. In order to meet power requirements, each enclosure is configured with up to five power supplies. The number of power supplies required for a configuration might vary depending on the type and quantity of server blades in the enclosure. The appropriate number of power supplies will be installed in each enclosure prior to shipment. The following table shows how the power supply bays are populated: Number of Power Supplies 1+1 2+1 3+1 4+1 Power Supply Bays 1, 4 1, 2 and 4 1, 2, 4 and 5 1, 2, 3, 4 and 5 Figure E-1 shows the number, and the location of the PSUs in a c7000 enclosure. E.5 CPE with c7000 Fan Bay Rules 113