HP LaserJet 4v/mv Service Manual - Page 105
Left Side Assemblies
View all HP LaserJet 4v/mv manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Removal & 6 Replacement NOTE Figure 6-7 6fusfan 6fusfanwmf Left Side Assemblies Exhaust Fan (FM1) The Exhaust Fan is located on the left side of the printer, just above the High Voltage Power Supply PCA. 1 Unplug the fan connector from the DC Controller (Figure 6-7, callout 1) and remove the cable from the (2) clips (Figure 6-7, callout 2). 2 Lift the fan out of its mounting, noting the position of the cabling (attaches to lower left outside of the fan body). Removal of the Card Cage provides easier access to the connector on the DC Controller PCA, especially when reconnecting (Figure 6-7, callout 1). Exhaust Fan To Reinstall: Make sure that the fan is installed in the correct direction (exhaust, not intake). The cables should be toward the outside. Removal and Replacement 6-13