HP LaserJet 4v/mv Service Manual - Page 62
Component, Cleaning Method/notes, Table 4-1
View all HP LaserJet 4v/mv manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Table 4-1 NOTE COMPONENT CLEANING METHOD/NOTES Outside Covers Use a water-dampened cloth. Do not use solvents or ammonia-based cleaners. Inside General Use a dry, lint free cloth. Remove all dust, spilled toner, and paper particles. Paper Pickup Rollers Use a water-dampened lint-free cloth. Registration Roller Use a dry lint-free cloth. Transfer Roller Use a dry, lint-free cloth. DO NOT TOUCH with your fingers. Anti-Static Teeth Use a dry, lint-free cloth. WARNING!: The (adjacent to Transfer Roller) Anti-Static Teeth are extremely sharp. Separation Pad Use a dry lint-free cloth. Fuser Assembly Use a water-dampened lint-free cloth. Cleaning Spilled Toner Defective toner cartridges can develop leaks. In addition, after a paper jam has occurred, there may be some toner remaining on the rollers and guides inside the printer. The pages that print immediately after the jam may pick up this toner. Clean spilled toner with a cloth slightly dampened in cold water. Do not touch the Transfer Roller with the damp cloth or with your fingers. Do not use a vacuum cleaner unless it is equipped with a micro-fine particle filter. If toner gets on your clothing, use cold water to remove it. Hot water sets toner stains into fabric. 4-4 Maintenance