HP LaserJet 4v/mv Service Manual - Page 136
Bottom Assemblies
View all HP LaserJet 4v/mv manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
CAUTION Figure 6-38 6footcap 6footcapwmf Bottom Assemblies Foot Assemblies The Left Side Foot removal procedure is described below. The Right Side Foot removal is similar. If the left side cover is in place, do not rest the printer on its left side, as this will damage the ventilation grill. 1 Remove lower paper cassette and turn the printer on its side. 2 Remove connector cover (if installed) (see Figure 6-38, callout 1). 3 Remove the Optional Lower Cassette connector by depressing the retainer ears inward (see Figure 6-38, callout 2). 4 Remove (3) machine screws (see Figure 6-38, callout 3). 5 Carefully pull the foot straight out while pushing the sensor tabs out of the way (see Figure 6-38, callout 4). Left Side Foot To Reinstall: Install the Optional Lower Cassette connector before reinstalling Foot assemblies. 6-44 Removal and Replacement