HP LaserJet 4v/mv Service Manual - Page 125
Remove the MP Tray see
View all HP LaserJet 4v/mv manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Removal & 6 Replacement CAUTION Figure 6-27 6papdoor 6papdoorwmf Front Door Assembly The Front Door assembly is removed as a single assembly and requires prior removal of the printer covers and the MP Tray. 1 Remove the MP Tray (see Figure 6-26). 2 Remove (1) screw (Figure 6-27, callout 1) and remove Fuser Cable tray cover. 3 Unplug the Fuser Cable (on the right side of the printer) and remove (2) screws to release the cable tray from the printer chassis (see Figure 6-16, callout 1). 4 Remove the plastic cable shield (already off in photo) and unplug the rearmost connector on the left side (Figure 6-27, callout 2). 5 Gently pry outward on the clips to release the right and left Front Door retainer arms (Figure 6-27, callout 3). The door assembly is heavy. Use caution when removing the hinge pins. 6 Using needle nose pliers, pull the hinge pins outward while supporting the weight of the Front Door assembly. Front Door Assembly To Reinstall: Note that the hinge pins on the Front Door assembly are different. The right side hinge pin is transparent in color and has a larger diameter head. The hinge pin for the left side is opaque and has a smaller diameter head. Removal and Replacement 6-33