HP LaserJet 4v/mv Service Manual - Page 114

Figure 6-16 6geartn1 6geartn1wmf Main Drive Assembly The Main Drive assembly is located on the right side of the printer toward the front. 1 Remove (2) machine screws (Figure 6-16, callout 1). 2 Unplug the Fuser connector from the Power Supply Unit (Figure 6-16, callout 2). 3 Lift out plastic cable shield and pull the cable tray out of the way (Figure 6-16, callout 3). 4 Carefully remove the e-clip from the registration clutch shaft (Figure 6-16, callout 4). 5 Remove (1) screw from the registration clutch alignment guide and remove the guide (Figure 6-16, callout 5). 6 Unplug the registration clutch connector (Figure 6-16, callout 6). 7 Slide the registration clutch off the shaft and free its cable from the cable clips. Main Drive Assembly Removal (1 of 2) (continued on next page) 6-22 Removal and Replacement