HP LaserJet 4v/mv Service Manual - Page 118
Remove the Transfer Roller see
View all HP LaserJet 4v/mv manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
CAUTION Figure 6-20 6fuser 6fuserwmf Fusing Assembly The Fusing assembly is located on the upper portion of the printer door. Do not remove (2) screws indicated in (Figure 6-20) by the null symbol ( ). 1 Remove the Transfer Roller (see Figure 6-19). 2 Remove (5) machine shoulder screws (Figure 6-20, callout 1). 3 Pull outward on the edges of the Front Door assembly to release the shaft (Figure 6-20, callout 2). 4 Lift the Fusing assembly up and out. CAUTION Fusing Assembly To Reinstall: Make sure that the Protection Plate (Figure 6-20, callout 3) is in place or damage to the toner cartridge drum will occur. 6-26 Removal and Replacement
Fusing Assembly
The Fusing assembly is located on the upper portion of the printer door.
CAUTION
Do not remove (2) screws indicated in (Figure 6-20) by the null symbol (
).
1
Remove the Transfer Roller (see Figure 6-19).
2
Remove (5) machine shoulder screws (Figure 6-20, callout 1).
3
Pull outward on the edges of the Front Door assembly to release the shaft
(Figure 6-20, callout 2).
4
Lift the Fusing assembly up and out.
Fusing Assembly
To Reinstall:
CAUTION
Make sure that the Protection Plate (Figure 6-20, callout 3) is in place or
damage to the toner cartridge drum will occur.
6fuser
6fuserwmf
Figure 6-20
6-26 Removal and Replacement