HP LaserJet 4v/mv Service Manual - Page 107
Remove the High Voltage Power Supply PCA
View all HP LaserJet 4v/mv manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Removal & 6 Replacement CAUTION Figure 6-9 6papsen 6papsenwmf Cassette Size Sensor Assembly 1 Remove the High Voltage Power Supply PCA (see Figure 6-8). 2 Disconnect the cable (see Figure 6-9, callout 1). 3 Remove the (1) machine screw (see Figure 6-9, callout 2). Be careful not to damage the sensor tabs when removing the assembly. 4 Carefully lift the Cassette Size Sensor Assembly up and out of the chassis. Cassette Size Sensor Assembly To Reinstall: Make sure the Cassette Size Sensor Assembly mounting bracket fits properly over the chassis locating pins when replacing the assembly. Make sure the connector is fully inserted into its receptacle. Removal and Replacement 6-15
Cassette Size Sensor Assembly
1
Remove the High Voltage Power Supply PCA
(see Figure 6-8).
2
Disconnect the cable (see Figure 6-9, callout 1).
3
Remove the (1) machine screw (see Figure 6-9, callout 2).
CAUTION
Be careful not to damage the sensor tabs when removing the assembly.
4
Carefully lift the Cassette Size Sensor Assembly up and out of the chassis.
Cassette Size Sensor Assembly
To Reinstall:
Make sure the Cassette Size Sensor Assembly mounting bracket fits
properly over the chassis locating pins when replacing the assembly.
Make sure the connector is fully inserted into its receptacle.
6papsen
6papsenwmf
Figure 6-9
6
Removal &
Replacement
Removal and Replacement 6-15