HP LaserJet 4v/mv Service Manual - Page 113
Right Side Assemblies
View all HP LaserJet 4v/mv manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Removal & 6 Replacement Figure 6-15 Right Side Assemblies Main Motor (M1) The Main Motor is located adjacent to the Power Supply Unit. Other than the covers, the Main Motor assembly does not require removal of any other assemblies. 1 Unplug the cable connector from the top of the Main Motor (Figure 6-15, callout 1). 2 Disconnect the Fuser cable from the Power Supply Unit (Figure 6-15, callout 2). 3 Remove (1) machine screw securing the right end of the cable tray, and drop the cable tray downward out of the way (Figure 6-15, callout 3). 4 Remove (2) large diameter, machine screws (Figure 6-15, callout 4). 5 The Main Motor is now free. Lift it up and out of the printer, being careful to clear any cables. 6mainmtr 6mainmtrwmf Main Motor To Reinstall: Make sure that the shaft meshes properly with the gear. Leave screws loose until both are started, then tighten. Removal and Replacement 6-21