HP M5025 Service Manual - Page 120
Remote firmware update through HP Web Jetadmin, Upload New Firmware Image
UPC - 882780575493
View all HP M5025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
NOTE The device automatically turns off and then on again to activate the update; this can happen more than once. At the end of the update process, the READY message appears on the control panel. Do not turn off the device or interfere with the update until you see this message. 4. Print a configuration page and verify that the firmware revision number matches the revision of the current update. 5. Type exit at the command prompt to close the command window. NOTE Print a menu map to see what features are available in the current firmware. Compare this menu map with a menu map printed before the firmware update to determine what features have been added or changed in the new firmware. To print a menu map from the device control panel, see Printing a menu map on page 82. Remote firmware update through HP Web Jetadmin This procedure requires that HP Web Jetadmin V7.8 or later is installed on the computer. Complete the following steps to update a single device through HP Web Jetadmin after downloading the .RFU file from the HP Web site. 1. Start HP Web Jetadmin. 2. Type the TCP/IP address or IP host name of the device in the Quick Device Find field, and then click Go. The device Status window opens. 3. Open the Device Management folder in the drop-down list in the Navigation panel. Navigate to the Device Lists folder. 4. Expand the Device Lists folder and select All Devices. Locate the device that you want to update in the list of devices, and click to select it. 5. Locate the drop-down box for Device Tools in the upper-right corner of the window. Select Update Printer Firmware from the choose action list. 6. If the name of the .RFU file is not listed in the All Available Images dialog box, click Browse in the Upload New Firmware Image dialog box and navigate to the location of the .RFU file that you downloaded from the Web. If the filename is listed, select it. 7. Click Upload to move the .RFU file from your hard drive to the HP Web Jetadmin server. 8. Refresh the browser. 9. Select the .RFU file from the Printer Firmware Update drop-down menu. 10. Click Update Firmware. HP Web Jetadmin sends the selected .RFU file to the device. 11. The download process begins and the firmware is updated on the device. This can take several minutes. Let the process finish without further interaction with the device or the computer. The messages described in the section Troubleshooting firmware updates on page 82 appear on the control panel. 90 Chapter 3 Manage and maintain the device ENWW