HP M5025 Service Manual - Page 97

Troubleshooting menu NOTE Values shown with "(default)" are the factory-default values. Some menu items have no default. Table 3-17 Troubleshooting menu Menu item Event Log Sub-menu item Sub-menu item Calibrate Scanner Fax T.30 Trace T.30 Report When to Print Report Fax Transmit Signal Loss Fax V.34 Fax Speaker Mode Values Description Print (button) Use this feature to show the 50 most recent events in the event log. Touch Print to print the full event log. Calibrate Use this feature to compensate for offsets in the scanner imaging system (carriage head) for ADF and flatbed scans. You might need to calibrate the scanner if it is not capturing the correct sections of scanned documents. Follow the instructions that appear on the control-panel display to complete the calibration procedure. Never auto print (default) Use this feature to print or configure the fax T.30 trace report. T.30 is the standard that specifies handshaking, protocols, and error correction between fax machines. Print after any fax job Print after fax send jobs Print after any fax error Print after send errors only Print after receive errors only A value between 0 and 30. (default = 0) Use this feature to set loss levels to compensate for phone line signal loss. Modifying this setting can cause the fax to stop functioning. Normal (default) Off Use this feature to disable V.34 modulations if several fax failures have occurred or if phone line conditions require it. Normal (default) Diagnostic This feature can be used by a technician to evaluate and diagnose fax issues by listening to the sounds of fax modulations. The factory default setting is Normal. ENWW Use the Administration menu 67