HP M5025 Service Manual - Page 82
Menu item, Sub-menu item, Values and Description, CAUTION, Security, Print Sec Secure Web - reset factory default
UPC - 882780575493
View all HP M5025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Table 3-11 Jetdirect menus (continued) Menu item Sub-menu item Security Print Sec Page Sub-menu item Secure Web IPsec or Firewall Reset Security Diagnostics Embedded Test LAN HW Test HTTP Test SNMP Test 52 Chapter 3 Manage and maintain the device Values and Description Yes: Prints a page that contains the current security settings on the HP Jetdirect print server. No (default): A security settings page is not printed. For configuration management, specify whether the embedded Web server will accept communications using HTTPS (Secure HTTP) only, or both HTTP and HTTPS. HTTPS Required: For secure, encrypted communications, only HTTPS access is accepted. The print server will appear as a secure site. HTTP/HTTPS optional: Access using either HTTP or HTTPS is permitted. Specify the IPsec or Firewall status on the print server. Keep: IPsec/Firewall status remains the same as currently configured. Disable: IPsec/Firewall operation on the print server is disabled. Specify whether the current security settings on the print server will be saved or reset to factory defaults. No: The current security settings are maintained. Yes: Security settings are reset to factory defaults. This menu provides tests to help diagnose network hardware or TCP/IP network connection problems. Embedded tests help to identify whether a network fault is internal or external to the device. Use an embedded test to check hardware and communication paths on the print server. After you select and enable a test and set the execution time, you must select Execute to initiate the test. Depending on the execution time, a selected test runs continuously until either the device is turned off, or an error occurs and a diagnostic page is printed. CAUTION Running this embedded test will erase your TCP/IP configuration. This test performs an internal loopback test. An internal loopback test will send and receive packets only on the internal network hardware. There are no external transmissions on your network. Select Yes to choose this test, or No to not choose it. This test checks operation of HTTP by retrieving predefined pages from the device, and tests the embedded Web server. Select Yes to choose this test, or No to not choose it. This test checks operation of SNMP communications by accessing predefined SNMP objects on the device. ENWW