HP M5025 Service Manual - Page 95

Table 3-16 Print Quality menu (continued) Menu item Sub-menu item REt Economode Toner Density Values Off Light Medium (default) Dark Enabled Disabled (default) Description ● FastRes 1200: Produces 1200-dpi quality for fast, high-quality printing of business text and graphics. ● ProRes 1200: Produces 1200-dpi quality for fast, high-quality printing of line art and graphic images NOTE It is best to change the Resolution setting in the program or print driver (program and print driver settings override control-panel settings). Use the Resolution Enhancement technology (REt) setting to produce print with smooth angles, curves, and edges. REt does not affect print quality if the print resolution is set to FastRes 1200 or ProRes 1200. All other print resolutions benefit from REt. NOTE It is best to change the REt setting in the program or print driver (program and print driver settings override control-panel settings). Use Economode to use less toner per page. Selecting Enabled extends the life of the toner supply and reduces cost per page. However, it also reduces print quality. The printed image is lighter, but it is adequate for printing drafts or proofs. NOTE It is best to enable the Economode setting in the program or print driver (program and print driver settings override control-panel settings). CAUTION HP does not recommend full-time use of Economode. If Economode is used fulltime, the toner supply might outlast the mechanical parts in the print cartridge. Choose from a range of 1 Lighten or darken the print on the page by setting the to 5. 3 is the default. Toner Density. Select a setting from 1 (light) to 5 (dark). The default setting of 3 produces the best results. ENWW Use the Administration menu 65