HP PSC 2500 HP PSC 2500 series All-in-One - (English) Reference Guide - Page 228

hardware installation troubleshooting, This selects Preferences

Page 228 highlights

troubleshooting chapter 19 hardware installation troubleshooting Use this section to solve any problems you might encounter while installing the HP PSC hardware. I received a message on the front panel display to attach the front panel cover This might mean the front panel cover is not attached, or it is attached incorrectly. Make sure to align the cover over the buttons on the top of the HP PSC and snap it firmly into place. the front panel displays the wrong language Usually, you set the language and country/region when you first set up the HP PSC. However, you can change these settings at any time by using the following procedure: 1 Press Setup. 2 Press 7, and then press 1. This selects Preferences, and then selects Set Language & Country/Region. You are prompted with a list of languages. You can scroll through the up and down arrows. 3 Press OK on the appropriate language. 4 When prompted, press 1 for Yes or 2 for No. You are prompted with all the countries/regions for the selected language. You can scroll through the up and down arrows. 5 Using the keypad, enter the two-digit number for the appropriate country/ region. 6 When prompted, press 1 for Yes or 2 for No. 7 You can confirm the language and country/region by printing a Self-Test Report, as follows: a. Press Setup. b. Press 1, and then press 4. This selects Print Report, and then selects Self-Test Report. I received a message on the front panel display to align the print cartridges The HP PSC prompts you to align cartridges every time you install a new print cartridge. For more information, see align the print cartridges on page 86. 218 hp psc 2500 series

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246

hp psc 2500 series
chapter 19
218
troubleshooting
hardware installation troubleshooting
Use this section to solve any problems you might encounter while installing the
HP PSC hardware.
I received a message on the front panel display to attach the front panel cover
This might mean the front panel cover is not attached, or it is attached incorrectly.
Make sure to align the cover over the buttons on the top of the HP PSC and snap
it firmly into place.
the front panel displays the wrong language
Usually, you set the language and country/region when you first set up the
HP PSC. However, you can change these settings at any time by using the
following procedure:
1
Press
Setup
.
2
Press
7
, and then press
1
.
This selects Preferences, and then selects Set Language & Country/Region.
You are prompted with a list of languages. You can scroll through the up
and down arrows.
3
Press
OK
on the appropriate language.
4
When prompted, press
1
for Yes or
2
for No.
You are prompted with all the countries/regions for the selected language.
You can scroll through the up and down arrows.
5
Using the keypad, enter the two-digit number for the appropriate country/
region.
6
When prompted, press
1
for Yes or
2
for No.
7
You can confirm the language and country/region by printing a Self-Test
Report, as follows:
a. Press
Setup
.
b. Press
1
, and then press
4
.
This selects Print Report, and then selects Self-Test Report.
I received a message on the front panel display to align the print cartridges
The HP PSC prompts you to align cartridges every time you install a new print
cartridge. For more information, see
align the print cartridges
on page 86.