HP Portable 386 Compaq Portable 386 Personal Computer Maintenance and Service - Page 29
Table 6-5. Parallel Printer Error Codes 4xx - xx Range, Jumper and Switch Settings.
View all HP Portable 386 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
303 - 01 Keyboard LED test, 8042 self test failed. 303 - 02 Keyboard LED test, retest test failed. 303 - 03 Keyboard LED test, retest failed. 303 - 04 Keyboard LED test, LED command test failed. 303 - 05 Keyboard LED test, LED command test failed. Error Code Error Description Recommended Action 303 - 06 Keyboard LED test, The following steps apply to error LED command test failed. codes 301 - 01 through 304 - 06. 303 - 07 Keyboard LED test, LED command test failed. 303 - 08 Keyboard LED test, command byte restore test failed. 303 - 09 Keyboard LED test, LEDs failed to light. 1. Check the keyboard connector. If disconnected, turn off the computer and connect the keyboard. 2. Replace the keyboard and retest. 3. Replace the system board and retest. 304 - 01 Keyboard repeat key test failed. 304 - 02 Unable to enter mode 3. 304 - 03 Incorrect scan code from keyboard. 304 - 04 No make code observed. 304 - 05 Cannot disable repeat key feature. 304 - 06 Unable to return to normal mode Table 6-5. Parallel Printer Error Codes (4xx - xx Range) Error Code Error Description Recommended Action 401 - 01 Printer connected test The following steps apply to error failed. codes 401 - 01 through 498 - 00: 402 - 01 Printer data register failed 402 - 02 Printer control register failed. 1. If a printer is connected, be sure it is turned ON and in the online mode. 2. Check the jumper settings on the system board (see Chapter 9, "Jumper and Switch Settings").