HP Portable 386 Compaq Portable 386 Personal Computer Maintenance and Service - Page 38
Table 6-11. Fixed Disk Drive Error Codes 17xx - xx Range, xx Fixed Disk Drive ID Test
View all HP Portable 386 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
1210 - 09 Modem exceeded maximum redial limit. 1210 - 10 Line quality prevented remote connection. 1210 - 11 Modem timed out waiting for remote connection. Table 6-11. Fixed Disk Drive Error Codes (17xx - xx Range) Error Code Error Description Recommended Action 1700 - xx Fixed Disk Drive ID Test The following steps apply to error codes 1700 - xx through 1717 - 73: 1700 - 05 Failed to reset controller 1. Check the system board jumper 1700 - 09 Failed to format a track settings and retest (see Chapter 9, "Jumper and Switch 1700 - 41 Failed to ID fixed disk drive Settings"). (drive not ready). 2. Replace the fixed disk drive signal and power cables and 1700 - 42 Recalibrate fixed disk drive retest. failed. 3. Replace the fixed disk drive and retest. 1700 - 45 Failed to get fixed disk 4. Replace the system board and drive parameters from ROM. retest. 1700 - 46 Invalid fixed disk drive parameters found in ROM. 1700 - 66 Failed to initialize fixed disk drive parameter. 1700 - 69 Failed to read drive size from controller. 1700 - 70 Failed translate mode. 1700 - 71 Failed nontranslated mode. Error Code Error Description Recommended Action 1701 - xx Fixed Disk Format Test The following steps apply to error codes 1700 - xx through 1717 - 73: 1701 - 05 Failed to reset controller 1. Check the system board jumper 1701 - 09 Failed to format a cylinder settings and retest (see Chapter 9, "Jumper and Switch 1701 - 42 Recalibrate fixed disk drive Settings"). failed. 2. Replace the fixed disk drive signal and power cables and 1701 - 58 Failed to write sector retest. buffer. 3. Replace the fixed disk drive