HP Portable 386 Compaq Portable 386 Personal Computer Maintenance and Service - Page 36
xx Modem Auto Answer Test
View all HP Portable 386 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
1203 - 01 Modem external TIP/RING failed. 1203 - 02 Modem external DATA TIP/RING failed. 1203 - 03 Modem line termination failed. Error Code Error Description Recommended Action 1204 - xx Modem Auto Originate Test The following steps apply to error codes 1201 - 01 through 1210 - 11: 1204 - 01 Modem timed out waiting for SYNC. 1. Check the jumper settings on the system board (see Chapter 9, 1204 - 02 Modem timed out waiting for "Jumper and Switch Settings"). response. 2. Check the modem connection to the 32 bit memory/modem 1204 - 03 Modem exceeded data block interface board. retry limit. 3. Replace the modem and retest. 4. Replace the 32 bit memory/modem 1204 - 04 RVC exceeded carrier lost interface board and retest. limit. 5. Replace the system board and retest. 1204 - 05 XMIT exceeded carrier lost limit. 1204 - 06 Time out waiting for dial tone. 1204 - 07 Dial number string too long. 1204 - 08 Modem timed out waiting for remote response. 1204 - 09 Modem exceeded maximum redial limit. 1204 - 10 Line quality prevented remote connection. Error Code Error Description Recommended Action 1204 - 11 Modem timed out waiting for The following steps apply to error remote connection. codes 1201 - 01 through 1210 - 11: 1205 - xx Modem Auto Answer Test 1205 - 01 Modem timed out waiting for SYNC. 1205 - 02 Modem timed out waiting for response. 1205 - 03 Modem exceeded data block 1. Check the jumper settings on the system board (see Chapter 9, "Jumper and Switch Settings"). 2. Check the modem connection to the 32 bit memory/modem interface board. 3. Replace the modem and retest. 4. Replace the 32 bit memory/modem interface board and retest.