HP Portable 386 Compaq Portable 386 Personal Computer Maintenance and Service - Page 40

xx Fixed Disk Drive Random Seek

Get HP Portable 386 - Notebook PC PDF manuals and user guides View all HP Portable 386 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

soft error limit. 1703 - 04 Previously exceeded maximum hard error limit. 1703 - 05 Failed to reset controller. 1703 - 06 Fatal error while reading. 1703 - 07 Fatal error while writing. 1703 - 08 Failed compare of write/ read buffers. settings and retest (see Chapter 9, "Jumper and Switch Settings"). 2. Replace the fixed disk drive signal and power cables and retest. 3. Replace the fixed disk drive and retest. 4. Replace the system board and retest. 1703 - 40 Cylinder 0 error. 1703 - 55 Cylinder 1 error. 1703 - 63 Failed soft error rate. 1703 - 65 Exceeded maximum bad sector per track. 1703 - 67 Failed to write long. Error Code Error Description Recommended Action 1703 - 68 Failed to read long. The following steps apply to error codes 1700 - xx through 1717 - 73: 1703 - 70 Failed translate mode. 1. Check the system board jumper 1703 - 71 Failed nontranslated mode. settings and retest (see Chapter 9, "Jumper and 1703 - 72 Exceeded maximum bad track Switch Settings"). limit. 2. Replace the fixed disk drive signal and power cables and 1703 - 73 Previously exceeded maximum retest. bad track limit. 3. Replace the fixed disk drive and retest. 1704 - xx Fixed Disk Drive Random Seek 4. Replace the system board and Test. retest. 1704 - 01 Exceeded maximum soft error limit. 1704 - 02 Exceeded maximum hard error limit. 1704 - 03 Previously exceeded maximum soft error limit. 1704 - 04 Previously exceeded maximum hard error limit. 1704 - 05 Failed to reset controller.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
soft error limit.
settings and retest
(see Chapter 9, "Jumper and
1703 - 04 Previously exceeded maximum
Switch Settings").
hard error limit.
2. Replace the fixed disk drive
signal and power cables and
1703 - 05 Failed to reset controller.
retest.
3. Replace the fixed disk drive
1703 - 06 Fatal error while reading.
and retest.
4. Replace the system board and
1703 - 07 Fatal error while writing.
retest.
1703 - 08 Failed compare of write/
read buffers.
1703 - 40 Cylinder 0 error.
1703 - 55 Cylinder 1 error.
1703 - 63 Failed soft error rate.
1703 - 65 Exceeded maximum bad sector
per track.
1703 - 67 Failed to write long.
------------------------------------------------------------------------------
Error
Code
Error Description
Recommended Action
------------------------------------------------------------------------------
1703 - 68 Failed to read long.
The following steps apply to error
codes 1700 - xx through 1717 - 73:
1703 - 70 Failed translate mode.
1. Check the system board jumper
1703 - 71 Failed nontranslated mode.
settings and retest
(see Chapter 9, "Jumper and
1703 - 72 Exceeded maximum bad track
Switch Settings").
limit.
2. Replace the fixed disk drive
signal and power cables and
1703 - 73 Previously exceeded maximum
retest.
bad track limit.
3. Replace the fixed disk drive
and retest.
1704 - xx Fixed Disk Drive Random Seek
4. Replace the system board and
Test.
retest.
1704 - 01 Exceeded maximum soft error
limit.
1704 - 02 Exceeded maximum hard error
limit.
1704 - 03 Previously exceeded maximum
soft error limit.
1704 - 04 Previously exceeded maximum
hard error limit.
1704 - 05 Failed to reset controller.