HP Portable 386 Compaq Portable 386 Personal Computer Maintenance and Service - Page 49
Table 6-13. COMPAQ Video Graphics Error Codes 24xx - xx Range, 01 Video Screen Memory Test - compaq hard drive
View all HP Portable 386 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
1906 - 06 Tape write protected error. 1906 - 14 Drive timeout error. The following codes apply to error codes 1900 - xx through 1991 - xx: 1906 - 16 Block locate (block ID) error. 1. Replace the tape cartridge and retest. 1906 - 17 Soft error limit exceeded. 2. Replace the tape drive expansion unit and retest. 1906 - 18 Hard error limit exceeded. 3. Replace the system board and retest. 1906 - 19 Write (probably ID error). 1906 - 20 765 Fatal error. 1906 - 24 Fail write protect test. 1906 - 26 Cannot ID drive. 1906 - 27 Drive not compatible with controller. 1991 - 12 Tape has not been servo written. Table 6-13. COMPAQ Video Graphics Error Codes (24xx - xx Range) Error Code Error Description Recommended Action 2402 - 01 Video Memory Test The following steps apply to error codes 2402 - 01 through 2416 - 01: 2403 - 01 Video Attribute Test 1. Verify switch settings on the 2401 - 01 Video Character Set Test video board and system board. 2. Replace the video board and 2405 - 01 Video 80 x 25 Mode 9 x 14 retest. Character Cell Test 3. Replace the system board and retest. 2406 - 01 Video 80 x 25 Mode 8 x 8 Character Cell Test 2407 - 01 Video 40 x 25 Mode Test 2408 - 01 Video 320 x 200 Mode Color Set 0 Test 2409 - 01 Video 320 x 200 Mode Color Set 1 Test 2410 - 01 Video 640 x 200 Mode Test 2411 - 01 Video Screen Memory Page Test 2412 - 01 Video Gray Scale Test