HP Portable 386 Compaq Portable 386 Personal Computer Maintenance and Service - Page 43
Failed File I/O Read Test., xx Fixed Disk Drive Head Select
View all HP Portable 386 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
1714 - 10 Failed diskette sector wrap (see Chapter 9, "Jumper and during read. Switch Settings"). 2. Replace the fixed disk drive 1714 - 20 Failed to get diskette drive signal and power cables and type. retest. 3. Replace the fixed disk drive 1714 - 24 Failed to read diskette media. and retest. 4. Replace the system board and 1714 - 25 Failed to verify diskette retest. media. 1714 - 40 Cylinder 0 error. 1714 - 48 Failed to move disk table to RAM. 1714 - 49 Failed to read diskette media in File Write Test. 1714 - 50 Failed File I/O Write Test. 1714 - 51 Failed File I/O Read Test. 1714 - 52 Failed File I/O Compare Test. Error Code Error Description Recommended Action 1714 - 55 Failed cylinder 1. The following steps apply to error codes 1700 - xx through 1717 - 73: 1714 - 65 Exceeded maximum bad sector per track. 1. Check the system board jumper settings and retest 1714 - 70 Failed translate mode. (see Chapter 9, "Jumper and Switch Settings"). 1714 - 71 Failed nontranslated mode. 2. Replace the fixed disk drive signal and power cables and 1714 - 72 Exceeded maximum bad track retest. limit. 3. Replace the fixed disk drive and retest. 1714 - 73 Previously exceeded maximum 4. Replace the system board and bad track limit. retest. 1715 - xx Fixed Disk Drive Head Select Test 1715 - 45 Failed to get fixed disk drive parameters from ROM. 1715 - 53 Failed Drive/Head register test. 1715 - 54 Failed Digital Input register test.