HP Portable 386 Compaq Portable 386 Personal Computer Maintenance and Service - Page 41
xx Fixed Disk Drive Format Bad
View all HP Portable 386 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
1704 - 06 Fatal error while reading. Error Code Error Description Recommended Action 1704 - 40 Cylinder 0 error. The following steps apply to error codes 1700 - xx through 1717 - 73: 1704 - 55 Cylinder 1 error. 1. Check the system board jumper 1704 - 65 Exceeded maximum bad sector settings and retest per track. (see Chapter 9, "Jumper and Switch Settings"). 1704 - 70 Failed translate mode. 2. Replace the fixed disk drive signal and power cables and 1704 - 71 Failed nontranslated mode. retest. 3. Replace the fixed disk drive 1704 - 72 Exceeded maximum bad track and retest. limit. 4. Replace the system board and retest. 1704 - 73 Previously exceeded maximum bad track limit. 1705 - xx Fixed Disk Drive Controller Test. 1705 - 05 Failed to reset controller. 1705 - 44 Failed fixed disk drive controller diagnostics. 1705 - 56 Failed controller RAM diagnostics. 1705 - 57 Failed controller to drive diagnostics. Error Code Error Description Recommended Action 1706 - xx Fixed Disk Drive Ready Test The following steps apply to error codes 1700 - xx through 1717 - 73: 1706 - 41 Drive not ready. 1. Check the system board jumper 1707 - xx Fixed Disk Drive Recalibrate settings and retest Test (see Chapter 9, "Jumper and Switch Settings"). 1707 - 42 Failed to recalibrate fixed 2. Replace the fixed disk drive disk drive. signal and power cables and retest. 1708 - xx Fixed Disk Drive Format Bad 3. Replace the fixed disk drive Track Test and retest. 4. Replace the system board and 1708 - 02 Exceeded maximum hard error retest. limit. 1708 - 05 Failed to reset controller.