HP Portable 386 Compaq Portable 386 Personal Computer Maintenance and Service - Page 32
Diskette Random Seek Test, Diskette Write/Read/Compare
View all HP Portable 386 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
601 - xx Format Test 601 - 05 Failed to reset controller 601 - 09 Failed to format a track 601 - 23 Failed to set drive type in ID media 602 - xx Diskette Read Test the system board and retest (see Chapter 9, "Jumper and Switch Settings"). 3. Check the diskette power and signal cable. 4. Replace the diskette power and signal cables and retest. 5. Replace the diskette drive and retest. 6. Replace the system board and retest. 602 - 01 Exceeded maximum soft error limit 602 - 02 Exceeded maximum hard error limit 602 - 03 Previously exceeded maximum soft error limit 602 - 04 Previously exceeded maximum hard error limit Error Code Error Description Recommended Action 602 - 05 Failed to reset controller The following steps apply to error codes 600 - xx through 699 - 00: 602 - 06 Fatal error while reading 1. Replace the diskette and retest. 603 - xx Diskette Write/Read/Compare 2. Check the jumper settings on Test the system board and retest (see Chapter 9, "Jumper and 603 - 07 Fatal error while writing Switch Settings"). 3. Check the diskette power and 603 - 08 Failed compare of write/read signal cables. buffers 4. Replace the diskette power and signal cables and retest. 604 - xx Diskette Random Seek Test 5. Replace the diskette drive and retest. 604 - 01 Exceeded maximum soft error 6. Replace the system board and limit retest. 604 - 02 Exceeded maximum hard error limit 604 - 03 Previously exceeded soft error limit 604 - 04 Previously exceeded hard error limit 604 - 05 Failed to reset controller 604 - 06 Fatal error while reading Error Code Error Description Recommended Action