HP Vectra VE C/xxx 7 HP Vectra VE C/xxx Series 7 PC - Network Administration G - Page 60
Installation for DOS, At Select Network Adapter, select
View all HP Vectra VE C/xxx 7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
4 Installing Other Network Drivers NDIS 2.01 Driver for Artisoft LANtastic 6.0 Installation for DOS After pressing at the message to run the install program under DOS: 1 Some Artisoft initialization messages will appear on the screen. Press to continue. 2 If this is the first installation, you will be prompted for Station Name and Target Directory. Then, select KEEP all previous LANtastic setup information. 3 Select any additional LANtastic features you wish to install (see Artisoft LANtastic manuals for more information). Press to continue. 4 At Select Network Adapter, select NDIS Support for Network Adapters. 5 Insert the HP Ethernet Family Adapter disk into the flexible disk drive and then press to continue. 6 Insert the appropriate Artisoft LANtastic 6.0 disks when prompted. Press to continue. 7 Select OK to perform the installation and press . 8 Information will appear on the screen. Press to continue. 9 Insert the appropriate Artisoft LANtastic 6.0 disk when prompted. Press to continue. 10 You will see the "Installation Complete" and "Need to reboot your computer" messages. Press to continue. Remove the disk from the flexible disk drive. Press to reboot. 11 During the boot sequence you will see the message: AMD PCNet Family Ethernet Adapter NDIS v2.01 MAC Driver, version x.xx Drivername Station Address and other configuration information. 12 Next, you will see some LANtastic configuration messages. The installation of the NDIS 2.01 driver for Artisoft LANtastic 6.0 is now complete. 60 English