HP Vectra VE C/xxx 7 HP Vectra VE C/xxx Series 7 PC - Network Administration G - Page 81
Start the Administrator Workstation., NET$DOS.SYS
View all HP Vectra VE C/xxx 7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
5 Configuring for Remote Boot Setting Up a Novell NetWare 3.x and 4.x Server for Remote Start 3 Test the bootable diskette by using it to log onto the server. (To do this, you must use F: not A: in the AUTOEXEC.BAT file.) 4 Generate the Boot Image on the server using DOSGEN. Refer to the Novell NetWare manual for details. (The name of this Boot Image file will always be NET$DOS.SYS): a Start the Administrator Workstation. b Log onto the LAN as SUPERVISOR. c Type MAP F:=SYS:SYSTEM d Type MAP G:=SYS:LOGIN e Change to the SYS:LOGIN directory by typing G: f Insert the bootable diskette into drive A. g Run DOSGEN by typing F:DOSGEN DOSGEN will create a Boot Image file called NET$DOS.SYS (containing a copy of the files on the bootable diskette) in the SYS:LOGIN directory. 5 Make the NET$DOS.SYS file in SYS:LOGIN shareable by typing FLAG NET$DOS.SYS S 6 If required, give the Modify capability to the remote boot user in SYS:LOGIN by typing GRANT M TO Username At this point, the PC should be able to start from the server without using the PC's flexible or hard disk (the server should already be set up). If a Login script Username has been assigned to the user, it will be executed at the end of the AUTOEXEC.BAT file created above. English 81