HP Vectra VE C/xxx 7 HP Vectra VE C/xxx Series 7 PC - Network Administration G - Page 64
NDIS 2.01 Driver with DEC PATHWORKS 5.0 Client, PATHWORKS Client Installation Guide
View all HP Vectra VE C/xxx 7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
4 Installing Other Network Drivers NDIS 2.01 Driver with DEC PATHWORKS 5.0 Client NDIS 2.01 Driver with DEC PATHWORKS 5.0 Client The installation procedure for a DEC PATHWORKS 5.0 client is as follows: 1 Verify that you have DOS and at least a minimal installation of Windows on your PC. 2 Insert your Lan Manager setup diskette in your diskette drive (for example A:), and make that drive the current drive the active drive by typing A: 3 Run SETUP by typing SETUP 4 Select Configure PC. 5 Select the drive you are installing the client from: A:\ if you want to install it from the diskette drive, or select Network if you want to install it from the DEC PATHWORKS server. 6 Select the protocol you want to use (netbeui, for example). 7 In the adapter list, select Other, and fill in the blanks with the following information: Adapter Name = HP Ethernet Family Adapter with LAN Remote Power NDIS driver path = A:\NDIS\DOS NDIS driver File = PCNTND.DOS NDIS driver Name = PCNTND$ 8 Then follow the SETUP program, until the Edit PROTOCOL.INI screen, please verify that it contains the following information: HP Ethernet Family Adapter DriverName = PCNTND$ BUSTYPE = PCI1 LED2 = 0x90 Make any changes if necessary and then save the file. 9 Follow the SETUP program for the rest of the installation, and refer to the PATHWORKS Client Installation Guide if you have any difficulties. The installation is now complete. 64 English