HP Xw4600 HP xw4600 Workstation - Service and Technical Reference Guide - Page 61
Removal and replacement procedures, Warnings and cautions - workstation system board
UPC - 883585516483
View all HP Xw4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
5 Removal and replacement procedures This chapter describes the removal and replacement procedures for most internal workstation components including the following topics: Topics Warnings and cautions on page 51 Service considerations on page 52 Customer Self-Repair on page 56 Predisassembly procedures on page 57 System board components on page 57 Removing and replacing components on page 58 Product recycling on page 106 Warnings and cautions WARNING! Any surface or area of the equipment marked with this symbol indicates the presence of a hot surface or hot component. If this surface is contacted, the potential for injury exists. To reduce the risk of injury from a hot component, enable the surface to cool before touching. WARNING! Any surface or area of the equipment marked with this symbol indicates the presence of an electrical shock hazard. To reduce the risk of injury from electrical shock, do not open any enclosed area marked with this symbol. WARNING! To reduce the risk of electric shock or damage to your equipment: - Do not disable the power cord grounding plug. The grounding plug is an important safety feature. - Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times. - Disconnect power from the equipment by unplugging the power cord from the electrical outlet. WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, health, and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located at http://www.hp.com/ergo. WARNING! If a product is shipped in packaging marked with this symbol, be lifted by two persons to avoid personal injury due to product weight. , the product must always CAUTION: Static electricity can damage the electronic components of the workstation. Before beginning these procedures, be sure you discharge static electricity by briefly touching a grounded metal object. ENWW Warnings and cautions 51