HP Xw4600 HP xw4600 Workstation - Service and Technical Reference Guide - Page 94
Battery,
UPC - 883585516483
View all HP Xw4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
2. Disconnect the fan wire from the connector on the system board and thread it out of the card guide (1). Figure 5-33 Removing the front fan housing/card guide 3. Unsnap the fan housing/card guide from the chassis (2) and lift it out of the chassis (3). 4. Remove the fan from the fan housing/card guide by applying outward pressure on the fan housing while pushing the fan out of the housing. Figure 5-34 Removing the fan from fan housing/card guide NOTE: To replace the front fan, reverse the previous steps, ensuring that the airflow direction arrow on the side of the fan points to the rear of the chassis. Battery This section describes how to remove and install the battery. The battery that comes with the workstation provides power to the real-time clock and has a minimum lifetime of about three years. 84 Chapter 5 Removal and replacement procedures ENWW