HP Z3100 HP Designjet Z3100 Photo Printer Series - Users Guide - Page 20
Choose which connection method to use, Connect to a network (Windows - windows 10 driver
UPC - 882780677531
View all HP Z3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installing the software Choose which connection method to use The following methods can be used to connect your printer. Connection type Fast Ethernet Jetdirect print server (optional accessory) USB 2.0 Speed Cable length Fast; varies according to Long (100 m=328 ft) network traffic Moderate; varies according to network traffic Long (100 m=328 ft) Very fast Short (5 m=16 ft) Other factors Requires extra equipment (switches) Requires extra equipment (switches) Provides additional features See http://www.hp.com/go/jetdirect/ for more details NOTE The speed of any network connection depends on all components used in the network, which can include network interface cards, hubs, routers, switches, and cables. If any one of these components cannot operate at high speed, you will have a low-speed connection. The speed of your network connection can also be affected by the total amount of traffic from other devices on the network. Connect to a network (Windows) Before you begin, check your equipment: ● The printer should be set up and on. ● The Ethernet hub or router should be on and functioning correctly. ● All computers on the network should be on and connected to the network. ● The printer should be connected to the network. Now you can proceed to install the printer software and connect your printer: 1. Make a note of the IP address from the status screen on the printer's front panel (192.168.1.1 in this example): 2. Insert the HP Start-Up Kit DVD into your computer. If the DVD does not start automatically, run the START.EXE program in the root folder of the DVD. 3. Click Install. The printer driver, HP Easy Printer Care, and HP Color Center are installed. 10 Chapter 2 Installing the software ENWW