HP Z6100ps HP Designjet Z6100 Printer Series - User's Guide - Page 58
Perform paper advance calibration - banding
UPC - 882780990135
View all HP Z6100ps manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
● The width of the paper in millimeters (estimated by the printer) ● The length of the paper in millimeters (estimated by the printer) If no paper is loaded, the message Out of paper appears. The same information appears on the Embedded Web Server's Supplies page. Perform paper advance calibration The printer is calibrated to advance correctly when printing all the papers that appear on the front panel. When you select the type of loaded paper, the printer adjusts the rate at which it advances the paper while printing. However, to fine-tune the image quality of your print, you might need to calibrate the rate at which the paper advances. See Troubleshoot print-quality issues on page 148 to determine whether paper-advance calibration is the solution for your issue. Accurate paper advance controls proper placement of dots on the paper. If the paper is not advanced correctly, light or dark bands appear in the printed image and the grain in the image might increase. To check the paper advance calibration status of the paper, select the loaded paper > View paper details. The status appears: icon, and then select View ● DEFAULT: this status appears when an HP paper is loaded. Unless you experience image-quality problems in your printed image, such as banding or graininess, HP recommends that you do not calibrate the paper advance. ● RECOMMENDED: this status appears when you create a new paper. The paper advance values for this paper are inherited from the family type. HP recommends that you perform a paper advance calibration to optimize the values. ● OK: this status indicates that the loaded paper has been calibrated previously. However, you might need to repeat the calibration if you experience image-quality problems, such as banding or graininess in your printed image. NOTE: Whenever you update the printer firmware, the paper-advance calibration values are reset to the factory default. See Update the printer firmware on page 141. NOTE: Colored papers, glossy canvas, and transparent materials such as translucent bond, clear film, natural tracing paper, and vellum are not suitable for paper-advance calibration. Overview of the paper advance procedure 1. On the front panel, select the icon, and then select Image quality maintenance > Paper advance calibration > Calibrate paper advance. The printer automatically calibrates the paper-advance and prints a paper advance calibration image. 2. Wait until the front panel shows the status screen, and then reprint your image. NOTE: The calibration procedure takes approximately six minutes. The front-panel display shows any errors in the process. If you are satisfied with your image, continue using this calibration for your paper type. If you see improvement in your image, continue with step 3. If you are dissatisfied with the calibration, return to the default calibration. See Return to the default calibration on page 47. 3. To fine-tune the calibration, select the icon, and then select Image quality maintenance > Paper advance calibration > Adjust paper advance. Handle the paper 46 Chapter 4 Handle the paper