IBM 4400-006 User Manual - Page 112

Chapter 5 Unix Ethernet Interface Configuration b. At the "Network Configuration" HTML form that displays, click in the field below the "IP Address" heading and type in the IP address for the Ethernet Interface. c. Under the "Subnet Mask" heading, enter the Ethernet Interface subnet mask. NOTE: If you would like to communicate with the Ethernet Interface from across routers, you will need to fill in an entry within the "Routing" section. Please see "Communicating Across Routers" on page 115 for further details. d. Click the SUBMIT button when done and physically repower the print server to make sure the new settings are in effect. Storing The IP Address And Subnet Mask To store the IP address and subnet mask using the Ethernet Interface internal command shell, npsh: a. Telnet to the Ethernet Interface using the IP address determined in step 2 above. Log in as root with no password. b. At the system prompt, enter the command to store the IP address: store tcpip 1 addr EthernetInterfaceIPaddress (e.g., store tcpip 1 addr 192.75.11.9) c. Now enter the command to store the subnet mask: store tcpip 1 mask netmask (e.g., store tcpip 1 mask 255.255.0.0) NOTE: If you would like to communicate with the Ethernet Interface from across routers, you will need to specify a default router using the store tcpip route command as described in "Communicating Across Routers" on page 115. d. Repower the printer to have the stored settings to take effect. 112