IBM 4400-006 User Manual - Page 134

Chapter 6 Novell Host Configuration 24. Press ESCAPE until back at the PCONSOLE Main Menu. 25. Repower the printer. 26. Wait two minutes and then select "Print Queue Information" from the PCONSOLE Main Menu. 27. Select this new queue from the menu that displays. 28. Select "Currently Attached Servers" to see which print server is servicing this queue. At this point, the Ethernet Interface name (e.g., M_071C1A) should show within this window. This means the Ethernet Interface knows about this new Novell print queue it must service as a PSERVER. Therefore, it will poll this queue regularly looking for jobs to print. NOTE: In a NetWare environment the Ethernet Interface will service only one of the four available printer objects (such as d1prn); do not configure more than one printer object from the printer. The Ethernet Interface cannot service multiple file servers at one time; do not configure multiple file servers to access the printer. NetWare Version 3.x RPRINTER Setup These steps are for Novell environments with Netware 3.x (or earlier) file servers. To configure a new RPRINTER on a NetWare 3.x network: 1. Log in to the Ethernet Interface command shell, npsh, as root. If you have TCP/IP available and this print server already has an IP address stored within it, you can use the built-in HTML configuration forms or a Telnet session. Please see "Configuration Tools" on page 32 for further details. If you have only Novell available, you will need to use a PC, laptop, or terminal. 134