IBM 4400-006 User Manual - Page 264
Smart, Pserver.nlm.
View all IBM 4400-006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 264 highlights
Chapter 15 Complete Command List SMART SMART store pserver novell user passwd password example: store pserver novell user passwd mplex2 Define a password on the Ethernet Interface for the Novell user already defined. This password must match the one stored on the Novell file server. Passwords are optional as long as there is not one defined on the file server for the user. store pserver smb workgrp newworkgroupname example: store pserver smb workgrp eng Define a different Windows workgroup as defined by newworkgroupname for the Ethernet Interface to be visible within (should be 14 characters or less). By default, the print server only comes up within the group called "WORKGROUP." store rprinter add|del printservername printernumber destination example: store rprinter add pserver1 0 d1prn Add or delete the RPRINTER settings on the Ethernet Interface for a Novell environment. The printservername must be the name of an existing PSERVER.NLM on your Novell file server. The printernumber is the printer number within this PSERVER.NLM. The destination is the queue on the Ethernet Interface where the print jobs will be sent to. store tcpip ifnum addr IPaddress example: store tcpip 1 addr 192.75.11.9 Store the IP address for the Ethernet Interface. store tcpip ifnum mask netmask example: store tcpip 1 mask 255.255.255.0 Store the subnet mask for the Ethernet Interface. store tcpip ifnum opts [[-]rarp] [[-]bootp] [[-]dhcp] example: store tcpip 1 opts -rarp -bootp -dhcp Enable or disable the automatic RARP, BOOTP, or DHCP requests for IP addresses upon bootup. If you are storing the Ethernet Interface TCP/IP network settings within the device, you will not need to rely on RARP, BOOTP, or DHCP for new settings. 264