IBM 4400-006 User Manual - Page 131
Using HTML Forms
View all IBM 4400-006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Using HTML Forms • Preferred File Server. In a bindery setup, this specifies the file server that the print server object was created on. In an NDS setup, this specifies a file server(s) that the print server object resides on. Since NDS is distributed, most administrators will not know which file server(s) the print server object is actually stored on, so in most NDS environments this option is not used. For additional information about these options, see "Novell Configuration For 10/100Base-T Interfaces" on page 145. Using HTML Forms SMART When defining a new print queue on a Novell file server, a new print server must be defined to represent the Ethernet Interface. This name must match the predefined name given to the print server. By default, this name is in the format "M_xxxxxx" where "xxxxxx" equals the last six digits of the Ethernet Interface address found on a configuration printout or control panel settings under Ethernet parameters, MAC Address (e.g., M_071C1A). To use the HTML forms to define a print queue, do the following: 1. Load a Web browser on a network station that can communicate with the print server over TCP/IP. The command to change the print server name is: Syntax: store pserver name newname Example to change the name to micro1: store pserver name micro1 2. Direct your Web browser to URL: http://EthernetInterfaceIPaddress/ adminConf.html (e.g., http://192.75.11.9/adminConf.html). NOTE: If prompted for a "User ID" and password first, type in root for the ID and press ENTER at the password prompt (since there is no password by default). 131