IBM 4400-006 User Manual - Page 78

Chapter 4 Windows Ethernet Interface Configuration Configuring A Default Router/Gateway To configure a default router/gateway using the Ethernet Interface internal command shell, npsh: 1. Telnet to the Ethernet Interface, and log in as root with no password. 2. At the system prompt, enter the command to store the default router/gateway address: store tcpip route add default routerIPaddress 1 (e.g., store tcpip route add default 192.75.12.0 1) 3. Repower the printer to have the stored setting to take effect. Changing Workgroup Names SMART Windows environments define groups of related computers as "workgroups." By default, "WORKGROUP" is the name that is assigned to the Ethernet Interface workgroup. However, you may want to change this to suit your network better. To do this using HTML forms: 1. Load a Web browser on your Windows station and direct it to the URL: http://EthernetInterfaceIPaddress/ networkConf.html (e.g., http://192.75.11.9/networkConf.html). NOTE: If prompted for a "User ID" and password first, type in root for the ID and press ENTER at the password prompt (since there is no password by default). 2. At the "Network Configuration" HTML form that displays, search for the "Windows (NetBIOS TCP/IP)" section and highlight the "Workgroup Name" field. 3. Type in the new workgroup name for the Ethernet Interface. 4. Click on the SUBMIT button when done and physically repower the print server to make the new settings take effect. 78