IBM 4400-006 User Manual - Page 250

Chapter 12 Configuring for a *LAN 3812 SNMP Device Description To look at the writer job, do the following: NOTE: Check to see if the writer is still active. 1. On the OS/400 command line, type the following: WRKJOB JOB(writer-name) The writer name is typically the same name given to the device description. Press the Enter key. This brings you to the Select Job panel or the Work with Job panel. If you are at the Select Job panel, the most current writer job is at the top of the list. Place a 1 in the Option field to the left of the most recent WTR job and press the Enter key. If the writer has ended, take menu option 4 (Work with spooled files) on the Work with Job panel. From the Work with Job Spooled Files panel, select Option 5 (Display) to display the QPJOBLOG spooled file or Option 2 (Change) to requeue the spooled file to a different output queue so it can be printed and investigated. Make any suggested corrections, restart the wtr, and re-submit the job. If the writer is still active, select menu option 10 (Display job log, if active or on job queue) on the Work with Job panel. Press the F10 key and the Page Up and Page Down keys to view the messages in the writer job log. Additional Information The success of *LAN 3812 SNMP device descriptions is dependent on the configuration settings in OS/400 as well as on the printer and print server hardware. For more information about configuring the time-out values on the printer and print server hardware and common error messages that you can receive when printing through a *LAN 3812 SNMP device description, please refer to the following document: 19935220 Configuration Settings and Error Messages for *LAN 3812 SNMP Device Descriptions located on the /400 support line Knowledge base Web site. 250