IBM 4400-006 User Manual - Page 187
Configuring AS/400 For ASCII Using TCP/IP, Configuring With ADDTCPIFC
![]() |
View all IBM 4400-006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Configuring With ADDTCPIFC The following three parameters must be specified: Line Description (LIND) The line description name is the user's name for the AS/400 adapter. This name must be identical to the name entered when the TCP/IP is configured on the AS/400. Resource Name (RSRCNAME) The system-assigned name for the interface (for example, LIN041). SSAP When *CALC is used, the values of "12" and "AA" are entered automatically as defaults. Verify that those SSAP values have not been changed. Configuring AS/400 For ASCII Using TCP/IP The next step is to configure the interface on the AS/400 for TCP/IP. NOTE: The AS/400 interface is not the Ethernet Interface. Do not set the AS/400 interface address to the same address as the Ethernet Interface IP address. Also, do not add the Ethernet Interface to the AS/400 TCP/IP interface list. Configuring With ADDTCPIFC ADDTCPIFC is used to add a TCP/IP interface to the AS/400. This step configures the AS/400 for attachments to a TCP/IP network. At the AS/400 command line, enter the following command: ADDTCPIFC INTNETADR ('9.99.15.188') LIND(ETHLAN) SUBNETMASK('255.255.255.0') Your completed screen should look like Figure 26. 187
![](/manual_guide/products/ibm-4400006-user-manual-641ae0d/187.png)