IBM 4400-006 User Manual - Page 274

Chapter 15 Complete Command List SMART SMART SMART SMART SMART 274 set snmp trap index [-]active Enable or disable an SNMP trap manager table entry. The index is the index number of the SNMP trap manager table. "active" enables the table entry, "-active" disables the entry. set snmp emailaddr index emailaddress The Ethernet Interface can also send SNMP alert messages to a desired e-mail address. To specify an e-mail address to send alert messages to, use this command to add the e-mail address to the SNMP alert table. The index is the index number of the SNMP trap manager table. The emailaddress is the desired e-mail address of the form [email protected]. set snmp emailformat index [-]short Enable or disable the short e-mail message format for an SNMP alert table entry. When enabled, the short e-mail format can be used when messages will be viewed on devices having a limited display size (a cellular phone or pager, for example). The index is the index number of the SNMP alert table. "short" enables the short e-mail format, "-short" disables it. set snmp shortmsglen index length Specify the length of the short e-mail message format for an SNMP alert table entry. This command is effective only when the short e-mail message format for an SNMP alert table entry is enabled. The index is the index number of the SNMP alert table. "length" specifies the length of the short e-mail message, and has an acceptable range of 15 to 80 characters. set snmp email index [-]active Enable or disable sending e-mail alert messages for an SNMP alert table entry. The index is the index number of the SNMP alert table. "active" enables the short e-mail format, "-active" disables it.