IBM 4400-006 User Manual - Page 219
Verifying The IPDS Configuration On AS/400, VRYCFG CFGTYPE*LIN, STRTCP, WRKTCPSTS, VRYCFG, CFGTYPE*DEV
View all IBM 4400-006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
Configuring PSF/400 for IPDS On V4R2 And Above Verifying The IPDS Configuration On AS/400 SMART To test IPDS printing: 1. If it is not already on, vary on the line description: VRYCFG CFGTYPE(*LIN) 2. To start TCP/IP, enter STRTCP. 3. Verify that the AS/400 TCP/IP interface is active. Use the command: WRKTCPSTS and then select option 1. 4. Turn the printer on and wait until the printer control panel displays "E-NET READY." 5. To verify the printer is connected to AS/400, ping the printer from an AS/400 workstation with one of the following commands: PING ip_address or PING hostname where ip_address is the Internet address of the remote system printer (the Ethernet Interface), and hostname is the hostname you defined for the printer, if any. • If the ping is not successful, refer to "Cannot PING The Printer" on page 222. • If the ping is successful, vary on the printer device description with the command: VRYCFG (printer_device) CFGTYPE(*DEV) STATUS(*ON) 6. To use PSF/400 to send an IPDS file to the printer, enter: STRPRTWTR DEV (printer_device) where printer_device is the name of the printer. 219