IBM 4400-006 User Manual - Page 290

Chapter 16 Printer Monitoring And Logging SMART To view the current logpath settings on the Ethernet Interface using the Ethernet Interface internal command shell, npsh: 1. Telnet to the Ethernet Interface, and log in as root with no password. 2. At the system prompt, enter the command to list the logpath settings: list logpath NOTE: If prompted for a "User ID" and password first, type in root for the ID and press ENTER at the password prompt since there is no password by default. To view the current logpath settings using the HTML forms on the Ethernet Interface: 1. Direct your Web browser to URL http://NICIPaddress/destConf.html (e.g., http://192.75.11.9/destConf.html). NOTE: If prompted for a "User ID" and password first, type in root for the ID and press ENTER at the password prompt (since there is no password by default). 2. At the "Print Path Configuration" HTML form that displays, select a destination link (e.g., d1prn) from the top of the page to bring up the appropriate destination form. 3. Once the desired destination HTML form displays, scroll down to the "Logpath Type" and "Logpath Port" sections to view the current logpath settings for this particular destination. At this point, you can alter any of these settings and then click the SUBMIT button to store them into the NIC. Remember to repower the NIC to make the settings take effect. 290