IBM 4400-006 User Manual - Page 136
At the Type field, select Remote Other/Unknown., default or select a priority.
![]() |
View all IBM 4400-006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Chapter 6 Novell Host Configuration 12. Select the print server that you want the Ethernet Interface to service as an RPRINTER. This is the PSERVER.NLM loaded in step 4. 13. Select "Print Server Configuration" from the menu that displays. 14. Select "Printer Configuration" from the next menu to display a list of configured printers. 15. Select an item from the list (e.g., an existing printer name or "Not Installed") to display the printer configuration window. 16. Assign a name (if not an existing printer) to this printer. 17. At the "Type" field, select "Remote Other/Unknown." 18. Click ESCAPE to save the changes. 19. Click ESCAPE until you are back at the "Print Server Configuration" menu. 20. Select "Queues Serviced by Printer" to display a list of defined printers. 21. Select the printer you just defined and press ENTER. 22. At the list of queues that displays, press INSERT to add a queue to the list. 23. Select the queue defined and press ENTER. 24. When prompted for a priority, press ENTER to select the default or select a priority. 25. Click ESCAPE until you have exited PCONSOLE. 26. Reload the PSERVER.NLM that the Ethernet Interface is to service as an RPRINTER. 27. Repower the Ethernet Interface by turning the printer off and then back on. 28. Wait two minutes and then check your PSERVER to see if the appropriate printer is being serviced. The PSERVER should indicate that the printer is "Waiting for job." At this point, the Ethernet Interface knows to receive any jobs this PSERVER.NLM has to send to it through the defined printer. 136
![](/manual_guide/products/ibm-4400006-user-manual-641ae0d/136.png)