IBM 4400-006 User Manual - Page 164
Manual Telnet Method, networkConf.html, Telnet
View all IBM 4400-006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Chapter 7 Novell Host Configuration (10/100Base-T) 3. Direct your Web browser to URL: http://EthernetInterfaceIPaddress/ networkConf.html (e.g., http://192.75.11.9/networkConf.html). NOTE: If prompted for a "User ID" and password first, type in root for the ID and press ENTER at the password prompt (since there is no password by default). 4. Look under the "Novell" section and find a row in the RPRINTER category. 5. Click "Enabled" and enter the name used with the PSERVER.NLM into the "Print Server Name" field. NOTE: If it is an NDS pserver, enter only the PSERVER name and not the context (e.g., sales_ps). 6. Enter the printer number of the printer you would like serviced into the "Printer Number" field, and then select the destination on the Ethernet Interface you would like to use for output. 7. Repeat steps 4 through 6 for each additional printer you would like to have serviced. 8. Click the SUBMIT button when done and physically repower the printer to make the new settings take effect. Manual (Telnet) Method 1. Load a PSERVER on your Netware 3.x, Netware 4.x, or Netware 5.x file server (i.e., issue a load pserver pservername command on the file server). NOTE: If it is an NDS PSERVER on a Netware 4.x/5.x file server, you must specify the pserver name and context for pservername. For example: load pserver .sales_ps.sales.printronix 2. Telnet to the print server: telnet ipaddress NOTE: If prompted for a "User ID" and password first, type root for the ID and press ENTER at the password prompt (since there is no password by default). 164