IBM 4400-006 User Manual - Page 148
Removing Preferred File Server, Novell Ethernet Interface Configuration 10/100Base-T, HTML Method
![]() |
View all IBM 4400-006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Chapter 7 Novell Ethernet Interface Configuration (10/100Base-T) Removing Preferred File Server HTML Method 1. Load a Web browser on a network station that can communicate with the print server over TCP/IP. 2. Direct your Web browser to URL: http://EthernetInterfaceIPaddress/ networkConf.html (e.g., http://192.75.11.9/networkConf.html). NOTE: If prompted for a "User ID" and password first, type in root for the ID and press ENTER at the password prompt (since there is no password by default). 3. Look under the "Novell" section and remove the name of the preferred file server from the "File Server" field. 4. Click the SUBMIT button when done and physically repower the print server to make the new settings take effect. Manual (Telnet) Method 1. Telnet to the print server: telnet ipaddress NOTE: If prompted for a "User ID" and password first, type in root for the ID and press ENTER at the password prompt (since there is no password by default). 2. You should see a prompt with the Ethernet Interface IP address: ipaddress:root> 3. At the prompt, enter: store pserver novell fserver del fservername where fservername is the name of the Novell file server you want to remove as a preferred file server. 4. Reset the unit to ensure the changes take effect. reset 148
![](/manual_guide/products/ibm-4400006-user-manual-641ae0d/148.png)