IBM 4400-006 User Manual - Page 17

WhatBIsasTihceEEththeernrneet tAIndteErf-aMcaei?l Basic Ethernet And E-mail The ability to configure e-mail (address and SMTP server) is disabled. This effectively disables all e-mail logging features. SMART Basic Ethernet And Network Test Page Printing An alternate method for generating the network test page is required, since the printer is not capable of initiating the process in the Ethernet. On initialization, if Ethernet dip switch 2 is "on" (or closed), the Ethernet test page will generate and be sent to the printer. NOTE: To print the Basic Ethernet test page that will fit within the paper width of the IBM 4400 thermal printer, the user must select the desirable font and pitch (i.e. Letter Gothic and 15 CPI), save the settings in a config, and select this config as the Power-Up config before starting the procedure for printing the Basic Ethernet Test Page. NOTE: When running LMU1 emulation the test page will not print if the ASCII Text Mode setting is set to Absorb. To print the test page, under LMU1 emulation, change the ASCII Text Mode parameter from Absorb to Auto Pass-thru. NOTE: If DHCP is enabled before powering up the printer with DIP switch 2 closed, the Basic Ethernet test page will show unconfigured IP settings instead of the actual dynamic IP settings. This is because the test page is printed upon the printer power-on before the Ethernet has negotiated with the DHCP server to obtain the dynamic IP address. Smart Ethernet A 10/100 BaseT Ethernet Interface card that provides Ethernet connectivity, extensive print server functions, and remote management capabilities with tighter printer integration. The Ethernet Interface package contains a Ethernet Interface to attach itself and the printer to the network. 17