IBM 4400-006 User Manual - Page 263

Store Commands SMART SMART SMART SMART store pserver tcpsocket TCPportnumber dest destination example: store pserver tcpsocket 5000 dest d1prn Assign a pre-defined TCPportnumber to a particular destination on the Ethernet Interface. Therefore, if you are using a print method that sends jobs directly to a TCP port number, you still have the option to process the job data through this destination setting. store pserver novell passwd password example: store pserver novell passwd mplex Store the password for the Ethernet Interface to use when logging in to a Novell file server. This password would have to match one set on the file server. store pserver novell fserver add|del fileservername example: store pserver novell fserver add fs1 Add or remove a server entry on the Ethernet Interface for the Novell file server it will be servicing. store pserver novell frametype 802.2|802.3|802.2 smap| autosense] Sets the frame type for the Novell protocol. store pserver from current Store all current general print server settings to flash memory so they are retained after a power cycle. This ensures all current settings match what is stored in flash memory. store pserver from default Set all general print server settings back to factory defaults. store pserver novell user name username example: store pserver novell user name micro1 Define a username on the Ethernet Interface to be used when it logs in to a Novell file server to find information. This username must match a user pre-defined on the Novell file server. 263