IBM 4400-006 User Manual - Page 286

Chapter 16 Ethernet Interface Security SMART To use the HTML forms on the Smart Ethernet Interface: 1. Direct your Web browser to URL: http://EthernetInterfaceIPaddress/ adminConf.html (e.g., http://192.75.11.9/adminConf.html). NOTE: If prompted for a "User ID" and password first, type root for the user ID and press ENTER at the password prompt (since there is no password by default). 2. At the "Administration Configuration" HTML form that displays, scroll down to the "Passwords" section. 3. Click within the "Old" field beside the "Root Password" heading and enter the existing root password. By default, there is no root password, so you can go to the next step without typing anything in this field. 4. Within the "Root Password" section, click within the "New" field and enter the new root password. 5. Within the "Root Password" section, click within the "Confirm" field and enter the new root password again. Remember this is case sensitive. 6. Click the SUBMIT button when done and physically repower the print server to make the new setting take effect. From this point on, anytime you log in to the Ethernet Interface as root, you will need to specify this password or your login attempt will fail. NOTE: To clear this password or change it, use the same "Administration Configuration" HTML form. Just enter the appropriate "Old" password and put in the new one (or nothing if you do not want a root password any longer). The commands directly on the Ethernet Interface are: set user from default save 286