IBM 4400-006 User Manual - Page 133
NetWare Version 3.x PSERVER Setup, e.g., M_071C1A.
View all IBM 4400-006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
NetWare Version 3.x PSERVER Setup 8. Press INSERT when the list of existing print servers displays. 9. Type the name of the Ethernet Interface when prompted for a print server name, and press ENTER when done. By default, the Ethernet Interface is named "M_xxxxxx" where "xxxxxx" equals the last six digits of the print server Ethernet address found on configuration printouts or by reading the MAC address on the control panel (e.g., M_071C1A). 10. Back at the print server list, select this newly defined Ethernet Interface and press ENTER. 11. Select "Print Server Configuration" from the menu that displays. 12. Select "Printer Configuration" from the next menu to display a list of configured printers. 13. Select the first item listed as "NOT INSTALLED" and press ENTER. 14. At the printer configuration window, type in the name for this new printer. The name must be one of the predefined destinations/queues on the Ethernet Interface, normally d1prn. 15. Go to the "Type" field and press ENTER to see the possible choices. 16. Select "Defined Elsewhere" from this list. 17. When done, press ESCAPE and select "Yes" to save the changes to this new printer. 18. Press ESCAPE again to return to the "Print Server Configuration" menu. 19. Select "Queues Serviced by Printer." 20. Select this new printer from the printer list that displays and press ENTER. 21. At the empty queue list that displays, press INSERT. 22. Select the queue created in step 5 and press ENTER. 23. When prompted for the priority, press ENTER to select the default or select a priority. 133