IBM 4400-006 User Manual - Page 276

Chapter 15 Complete Command List SMART set sysinfo contact contactname example: set sysinfo contact Paul_Harris Set a person or department to contact in case of print server trouble. set sysinfo prnserial printerserialnumber example: set sysinfo prnserial 4400-001 Set the printer serial number for the Ethernet Interface. This is for information purposes only, and does not affect the operation of the print server in any way. set sysinfo loginfo [-]sys | [-]tcp example: set sysinfo loginfo -sys tcp Set the Ethernet Interface debugging information type. Usually this information includes unexpected errors or exceptions from the print server divided into these groups: sys General system messages tcp TCP stack messages NOTE: This is not printer or job logging information. set sysinfo logport null|syslog example: set sysinfo logport null Define to where the debugging information should be sent. This can be sent to an output device off of the Ethernet Interface I/O port or to a central TCP/IP host running a SYSLOG daemon. To set TCP/IP host, use the command set sysinfo syslog hostIPaddress. set sysinfo email emailaddress example: set sysinfo email [email protected] Define the user email address to receive printer and job logging information from a particular logpath on the Ethernet Interface. Email name is the host or IP name of the user. 276