IBM 4400-006 User Manual - Page 153

Changing The Ethernet Interface Name (NDS and Bindery Setups) HTML Method 1. Load a Web browser on a network station that can communicate with the print server over TCP/IP. 2. Direct your Web browser to URL: http://EthernetInterfaceIPaddress/ adminConf.html (e.g., http://192.75.11.9/adminConf.html). NOTE: If prompted for a "User ID" and password first, type in root for the ID and press ENTER at the password prompt (since there is no password by default). 3. Look under the "System Information" section and enter the new name into the "Name" field. 4. Click the SUBMIT button when done and physically repower the printer to make the new settings take effect. Manual (Telnet) Method 1. Telnet to the print server: telnet ipaddress NOTE: If prompted for a "User ID" and password first, type root for the ID and press ENTER at the password prompt (since there is no password by default). 2. You should see a prompt with the Ethernet Interface IP address: ipaddress:root> 3. At the prompt, enter: store pserver name name 4. Reset the unit to ensure the changes take effect. reset 153