IBM 4400-006 User Manual - Page 275

Set Commands SMART SMART set snmp syslog index [-]active The Ethernet Interface can also log SNMP alert messages to the defined SYSLOG host (see the 'set sysinfo syslog' command description). Use this command to enable or disable logging of alert messages for an SNMP alert table entry. The index is the index number of the SNMP alert table. "active" enables alert message logging, "-active" disables it. set snmp alerts index [-]all | [[-]warning] [[-]offline] [[-]mediainput] [[-]mediaoutput] [[-]mediapath] [[-]marker] [[-]cutter] [[-]barcode] [[-]scanner] [[-]intervention] [[-]consumable] [[-]label]set snmp alerts 1 warning -cutter] example: enable warning alerts and disable cutter alerts for SNMP table entry 1 This specifies which alert groups are enabled for reporting via an SNMP manager, e-mail alert message, and/or Unix syslog daemon. See Table 5 on page 63 for a description of specific printer events belonging to each group. The index is the index number of the SNMP manager/alert table. "-all" disables and "all" enables reporting of alerts in all alert groups. Individual alert groups can be selectively enabled or disabled via combinations of alert group switches. set sysinfo label|name newname example: set sysinfo name salesprinter Set a descriptive name defined by newname for Ethernet Interface identification purposes. This is not used in the operation of the print server in any way. set sysinfo location description example: set sysinfo location salesdept Set the physical location of the Ethernet Interface. This is for identification purposes and is not used in the operation of the print server in any way. 275