IBM 4400-006 User Manual - Page 135

NetWare Version 3.x RPRINTER Setup NOTE: If you use HTML configuration, you will need to go to the "Network Configuration" HTML form (i.e., http://IPaddress/networkConf.html; e.g., http://192.75.11.9/networkConf.html) and look under the "Novell" section. The settings in the following step are found there. If using a Telnet session, you will need to manually execute the commands listed in the next step. 2. Store the RPRINTER settings on the Ethernet Interface. This will refer to an existing PSERVER.NLM on the file server or to one that you will create later in these steps. Syntax: store rprinter add PSERVERname printernumber EthernetInterfacedestination An example for an RPRINTER servicing printer 0 of the PSERVER.NLM called pserver1 and sending jobs to the Ethernet Interface destination d1prn is: store rprinter add pserver1 0 d1prn 3. Leave this Ethernet Interface login session and log on to the NetWare 3.x file server as "Supervisor." 4. Load a PSERVER.NLM if one is not already loaded. This will be the PSERVER that the Ethernet Interface services as an RPRINTER, so it must match the PSERVER name given in step 2. 5. Enter PCONSOLE. 6. Select "Print Queue Information" from the PCONSOLE Main Menu. 7. Press INSERT to add a new queue to the list of currently defined queues. 8. Type in the name of this new queue when prompted, and press ENTER. This can be any name you would like. 9. Click ESCAPE to return to the Main Menu. 10. Select "Print Server Information" and press ENTER. 11. Press INSERT when the list of existing print servers displays. 135